Products

Jeep Wrangler Door Hinge Bushings

Magnitude Engineering's replacement bushings for Jeep Wrangler, CJ, YJ, TJ, and JK door hinges will allow you to replace your deteriorated, worn out, or missing OEM bushings with ease. Whether you are trying eliminate unsightly rust, compensate for years of wear, fix that door that won't latch properly, or prevent potentially damaging leaks due to door misalignment; replacing your bushings is the simplest and most cost effective way to improve the appearance and operation of your door. Simply remove the old bushings if necessary and insert new ones in their place without the extra time and expense of purchasing new hinges, removing the old ones, prepping and painting, or aligning. As opposed to replacing your hinges, replacing only your bushing minimizes the risk stripping a screw or damaging paint.

Magnitude Engineering's replacement bushings are precision machined from high lubricity Delrin® bar. They firmly support loads in both the radial and axial directions due to their full length barrel and flange. Because of the self-lubricating nature of the material, these bushings do not require additional lubrication. Unlike OEM bushings that are roll-formed from flat sheets of laminated material, these solid bushings will not flake apart or delaminate.

These bushings are designed to fit OEM door hinges on Jeep CJ ('76-'86), Jeep Wrangler YJ ('87-'96), Jeep Wrangler TJ ('97-'06), Jeep Wrangler Unlimited LJ ('04-'06), and Jeep Wrangler JK ('07-Current) models. JK hinges are different than those used on CJ, YJ, TJ, and LJ models and require different bushings (listed separately below). They are sold in sets of 4 or 8 pieces; enough to rebuild 2 or 4 doors respectively and are black in colored.

Two lines of bushings are available: Value and Premium

Value bushings are our original smooth design that simply slides into your hinge after removal of the old bushing. These bushings provide a cost-effective way to improve the performance and appearance of your hinges.

2-Door Hinge Bushing Value Set for CJ, YJ, TJ, LJ ('76-'06) – $27.96

2-Door Hinge Bushing Value Set for JK ('07-Current) – $27.96

4-Door Hinge Bushing Value Set for JK ('07-Current) – $49.92

Premium bushings are our latest textured design that presses into your hinge after removal of the old bushing for a tighter fit and enhanced retention when removing your doors. This design is exclusive to Magnitude Engineering and demonstrates our commitment to innovation and providing the best possible product for our customers to meet their needs. Premium bushings not only include the bushings themselves, but also a stainless steel installation and removal tool.

2-Door Hinge Bushing Premium Set for CJ, YJ, TJ, LJ ('76-'06) – $59.95

2-Door Hinge Bushing Premium Set for JK ('07-Current) – $59.95

4-Door Hinge Bushing Premium Set for JK ('07-Current) – $81.91

Jeep Wrangler Door Hinge Pins

Magnitude Engineering's line of stainless steel replacement pins for Jeep Wrangler door hinges will allow you to replace your corroded, deteriorated, broken, or worn out pins with ease. Whether you are trying eliminate unsightly rust, compensate for years of wear, fix that door that won't latch properly, or prevent potentially damaging leaks due to door misalignment; replacing your pins is a simple and cost effective way to improve the appearance and operation of your door. Simply remove the old pins and insert new ones in their place without the extra time, expense, and risk of replacing your hinges. As opposed to replacing your hinges, replacing only your pins minimizes the risk stripping a screw, exposing unpainted steel, or damaging paint on your door that could cause it to rust.

Magnitude Engineering's replacement pins are precision machined from solid stainless steel bar. Unlike OEM or other replacement pins that are cold formed from rust susceptible mild steel and coated with a thin layer of plating that can be scratched or wear away over time, these solid stainless steel pins will not flake or rust. These pins are designed to fit OEM door hinges on Jeep CJ ('76-'86), Jeep Wrangler YJ ('87-'96), Jeep Wrangler TJ ('97-'06), Jeep Wrangler Unlimited LJ ('04-'06), and Jeep Wrangler JK ('07-Current) models. JK hinges are different than those used on CJ, YJ, TJ, and LJ models and require different pins (listed separately below). They are sold in sets of 4 or 8 pieces; enough to rebuild 2 or 4 doors respectively.

2-Door Hinge Pin Set for CJ, YJ, TJ, LJ ('76-'06) – $79.95

2-Door Hinge Pin Set for JK ('07-Current) – $79.95

4-Door Hinge Pin Set for JK ('07-Current) – $139.92

Jeep Wrangler Door Hinge Pin and Bushing Combination Sets

For those customers that need both pins and bushings, Magnitude Engineering offers combination sets at a discounted cost as compared to purchasing each component separately.

2-Door Hinge Pin and Bushing Premium Set for CJ, YJ, TJ, LJ ('76-'06) – $129.91

2-Door Hinge Pin and Bushing Premium Set for JK ('07-Current) – $129.91

4-Door Hinge Pin and Bushing Premium Set for JK ('07-Current) – $199.83

Cat 40 Tool Storage Rack

Magnitude Engineering's tool storage rack will store 16 preset tools mounted in their holders for use with your mill. This rack has four integrally designed hanging tabs specially designed to mount directly to the 13-inch wide slots on Haas CNC mills. This rack can also be used with any mill as a stand-alone benchtop rack. The top of this rack is angled 15 degrees to allow for easy access to all tools and its full height front and side flanges protect tool holder tapers and pull studs from stray chips.

Cat 40 Tool Storage Rack - $99.95 - Contact us to Order

Order Difficulties?

If you have any difficulty placing your order, please contact us using the information provided below.